Home / Equipment / Golf Equipment / Walk Greens Mowers / Walk Greens Mowers | 220 E-Cut™ Hybrid | Walk Greens Mowers

Walk Greens Mowers | 220 E-Cut™ Hybrid | Walk Greens Mowers

Walk Greens Mowers | 220 E-Cut™ Hybrid | Walk Greens Mowers

Walk Greens Mowers
John Deere
#220eam

Disclaimer

Caracteristics

  • Easy reel maintenance
  • Quick and easy troubleshooting
  • Maximum comfort and control
  • Quick release to disengage traction

Please note that this product is not available online.
Get pre-approved for financing
SKU: 220eam Categories: , ,

Description

John Deere 220 E-Cut Hybrid Walk Greens Mowers.

Specifications

Engine Type Air-cooled, Gas
Horsepower At 3600 rpm: 2.4 kW
3.2 hp
Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Cutting width 55.9 cm
22 in.
Reel diameter 127 mm
5 in.
Number of blades 7, 11 or 14 blade
Frequency of clip standard Variable with 5 settings 11 Blade 4.1, 4.6, 5.6, 9.7, 12.2; 14 Blade 3.2, 3.6, 4.4, 7.6, 9.6 mm
Variable with 5 settings 11 Blade 0.162, 0.180, 0.220, 0.380, 0.480; 14 Blade 0.120, 0.140, 0.180, 0.300, 0.380 in.
Traction drum Dual, aluminum
Forward speed With transport wheels at 3000 engine rpm: 7.2 km/h km/h
4.5 mph
Weight (less GTCs, gear drive and transport wheel with catcher) 119 kg
262 lb
Operator ear 79 dBA
Type Air-cooled, Gas
Cycle 4-cycle
Bore and stroke 60x42 mm
2.36x1.65 in.
Piston displacement 122 cc
7.4 cu in.
Compression ratio 8.5:1
Horsepower At 3600 rpm: 2.4 kW
3.2 hp
Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Direction of rotation of output shaft Counterclockwise viewed from shaft side
Inclination limit Tilted up to 20 degrees in any direction
Idle speed at output shaft 1700 (+/- 100) rpm
Maximum speed at output shaft 2950 (+/-150) rpm
Type Regular grade unleaded or leaded
Tank capacity 2.5 L
0.66 U.S. gal.
Type SAE 30 or SAE 10W-30
Capacity 0.6 L
0.63 U.S. qt
Differential drive capacity 0.14 pt
0.3 L
Cutting width 55.9 cm
22 in.
Cutting height (minimum) Standard - 3.0-mm bedknife
Min. 3.2 mm
0.125 in.
Max: 22 mm
0.875 in.
option
Optional - 2.5-mm bedknife
Min 2.5 mm
0.098 in.
Max. 22 mm
0.875 in.
option
Optional - 2.0-mm bedknife
Min 2.0 mm
0.078 in.
Max. 22 mm
0.875 in.
standard
Frequency of clip standard Variable with 5 settings 11 Blade 4.1, 4.6, 5.6, 9.7, 12.2; 14 Blade 3.2, 3.6, 4.4, 7.6, 9.6 mm
Variable with 5 settings 11 Blade 0.162, 0.180, 0.220, 0.380, 0.480; 14 Blade 0.120, 0.140, 0.180, 0.300, 0.380 in.
Diameter 127 mm
5 in.
Number of blades 7, 11 or 14 blade
Material Heat-treated chromium molydenum steel
Brush Interlocked with reel, rotation in reverse direction; nylon diameter: 60 mm
2.375 in.
Adjustable brush or cutter height Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm
0.031 in.
Size, lb (kg) 3.2 kg
7 lb
Type Polyethylene
Transport Belt tension
Reel jaw-type clutch On/off
Brush/GTC jaw-type clutch On/off
Traction drum Dual, aluminum
Forward speed With transport wheels at 3000 engine rpm: 7.2 km/h
4.5 mph
Roller - rear Aluminum, diameter: 190 mm
7.5 in.
Roller - front (grooved or smooth) Machined steel, diameter: 50 mm
2 in.
for cutting height adjustment)
Length (with tires installed) 99 cm
39 in.
Width (with tires installed) 94.6 cm
37.25 in.
Height (with tires installed) 119 cm
47 in.
Weight (less GTCs, gear drive and transport wheel with catcher) 119 kg
262 lb
Type ANSI B71.4-2004
Operator ear 79 dBA
Measuring standard ISO 11201
Attachments installed GTCs, reels engaged

Related products