6080A E-Cut™ Hybrid | Fairway Mowers

Fairway Mowers
John Deere
#6080a_e-cut

Disclaimer |

Characteristics

  • 24.7 HP* engine
  • 3-wheel smooth tire configuration
  • Passcode protected TechControl display
  • Hybrid system – reduced fuel consumption / noise reduction / hydraulic leak points
  • Width of Cut – 80" (5 18” QA5)

Note that this product is available in store only.
Get pre-approved for financing
SKU: 6080a_e-cut Categories: , ,

Description

6080A E-Cut™ Hybrid Fairway Mower.

Specifications

Maximum rated horsepower At 3000 rpm: 18.4 kW
24.7 hp
High idle: 3200 rpm
Drive pump Axial piston, electronically controlled hydrostatic traction pump; single gear pump for steering, lift, and charge; electric reel drive
Ground pressure 69 kPa
10 psi
Throttle Hand throttle
Operator display TechControl display located on CommandARM™ console: machine warnings, onboard electrical diagnostics, service timers on large easy-to-read screen, quick on-the-go settings for mow and transport speed, Turn Speed, LoadMatch™ switch, and ON/OFF cruise control use selection
All settings passcode protected
Mowing speed 12.8 km/h
8 mph
Cutting unit size Quick Adjust 5 (QA5): 45.7 cm
18 in.
Total width of cut 203 cm
80 in.
Reel diameter 12.7 cm
5 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) 11- blade: 0.69 mm/km/h
0.044 in./mph
7-blade: 1.09 mm/km/h
0.069 in./mph
Type Indirect inject diesel
Compliant emission regulation United States and Canada: Tier 4
Horsepower Maximum rated horsepower
At 3000 rpm: 18.4 kW
24.7 hp
High idle: 3200
Cylinders Three
Displacement 1.267 L
77.32 cu in.
Air cleaner Two-stage dry element
Fuel Diesel up to B20 compliant
Cooling system Liquid centrifugal pump; forward machine location for optimum cooling
Drive pump Axial piston, electronically controlled hydrostatic traction pump; single gear pump for steering, lift, and charge; electric reel drive
Hydraulic system capacity 37.8 L
10 U.S. gal.
Fuel tank capacity 45.4 L
12 U.S. gal.
Steering Hydraulic power with double acting steering cylinder
Front drive tires 24x13-12 smooth
Steering tires 24x13-12 smooth
Ground pressure 69 kPa
10 psi
Brakes Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS Standard; meets ISO 21299 Standard
Cutting units lowered 1080 kg
2381 lb
Canopy, fairway tender conditioners, and power brushes installed with full fuel
Throttle Hand throttle
Forward/reverse Two pedal
Mower lift One-touch single handle
Parking brake Electric switch on CommandARM for internal wet disk brakes
Seat Suspension seat with seat belts and armrest, fore/aft adjustment, and weight and lumbar adjustment
PTO Electric switch on CommandARM
Tilt steering Left-foot operated for easy adjustment
Operator display TechControl display located on CommandARM: machine warnings, onboard electrical diagnostics, service timers on large easy-to-read screen, quick on-the-go settings for mow and transport speed, Turn Speed, LoadMatch, and ON/OFF cruise control use selection
All settings passcode protected
Storage Cup holder, two-way radio, and large operator storage located on left-hand side of operator station
Height with ROPS 215.3 cm
84.8 in.
Length 305 cm
120.1 in.
Transport width 232 cm
91.3 in.
Mowing position width 233 cm
91.7 in.
Ground speed Mowing
0 to 12.8 km/h
0 to 8.0 mph
Transport
0 to 16.1 km/h
0 to 10.0 mph
Reverse
0 to 9.7 km/h
0 to 6.0 mph
Number Five
Size Quick Adjust 5 (QA5): 45.7 cm
18 in.
Total width of cut 203 cm
80 in.
Height of cut Requires optional bedknife for lowest HOC and 76.2-mm (3-in.) roller for highest HOC: 2-28.5 mm
0.078-1.125 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers
Options available: 50.8 mm
2 in.
76.2 mm
3 in.
11- blade: 0.69 mm/km/h
0.044 in./mph
7-blade: 1.09 mm/km/h
0.069 in./mph
Reel diameter 12.7 cm
5 in.
Measuring standard ISO 11201
Attachments installed Fairway tender conditioners, reels engaged
Type Two-year limited
Type ANSI B71.4-2017