6700A E-Cut™ Hybrid | Fairway Mowers

Fairway Mowers
John Deere
#6700a_e-cut

Disclaimer |

Characteristics

  • 3-wheel smooth tire configuration for tight turns
  • Electric reel drive powered by 240 amp, 56-volt alternator for mowing, scalping and verticutting
  • Passcode protected TechControl display
  • Reduce fuel consumption, noise, and hydraulic leak points
  • Width of Cut – 100" (254 cm) with five 22" (55.9 cm) QA7 reels
  • Alternator and Engine LoadMatch™ maintain cut quality in tough conditions

Note that this product is available in store only.
Get pre-approved for financing
SKU: 6700a_e-cut Categories: , ,

Description

Three-wheel drive Hybrid mower with a 100-in (254 cm) width of cut and QA7 reels designed for mowing, scalping and verticutting.

Specifications

Maximum rated horsepower At 3000 rpm: 24.7 hp (18.4 kW)
High idle 3200 rpm
Drive pump Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge
Ground pressure 69 kPa
10 psi
Throttle Hand throttle
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Mowing speed 0 to 12.8 km/h
0 to 8.0 mph
Cutting unit size Quick Adjust QA5: 55.9 cm
22 in.
Total width of cut 254 cm
100 in.
Reel diameter 17.8 cm
7 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) 10- Blade: 1.04 mm/km/h
10- Blade: 0.066 in./mph
8-Blade: 1.30 mm/km/h
8-Blade: 0.083 in./mph
Type Indirect Inject Diesel
Compliant emission regulation United States and Canada Final Tier 4, EU Stage V
Horsepower Maximum rated horsepower
At 3000 rpm: 24.7 hp (18.4 kW)
High idle 3200 rpm
Cylinders Three
Displacement 1.267 L
77.32 cu in.
Air cleaner 2-stage dry element
Fuel Diesel Up to B20 compliant
Cooling system Liquid centrifugal pump; forward machine location for optimum cooling
Drive pump Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge
Hydraulic system capacity 37.8 L
10 U.S. gal.
Fuel tank capacity 60.6 L
16 U.S. gal.
Steering Hydraulic power with double acting steering cylinder
Front drive tires 26.5x14-12 smooth
Steering tires 24x13-12 smooth
Ground pressure 69 kPa
10 psi
Brakes Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS Standard; meets ISO 21299 Standard
Cutting units lowered 1181 kg
2598 lb
Canopy, FTCs and Power Brushes installed, full fuel
Throttle Hand throttle
Forward/reverse 2-pedal
electronic control of eHydro system
Mower lift One-touch single handle
Parking brake Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO Electric Switch on Command Arm
Tilt steering Left Foot operated for easy adjustment
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Storage Cup holder; two-way radio; large operator storage located on left hand side of operator station
Height with ROPS 217.3 cm
85.6 in.
Length 307.2 cm
121 in.
Transport width 219 cm
86.2 in.
Mowing position width 287 cm
113 in.
Ground speed Mowing
0 to 12.8 km/h
0 to 8.0 mph
4WD mow speed
N/A
Transport
0 to 16.1 km/h
0 to 10.0 mph
Reverse
0 to 9.7 km/h
0 to 6.0 mph
Number Five
Size Quick Adjust QA5: 55.9 cm
22 in.
Total width of cut 254 cm
100 in.
Height of cut Construction
6.3 to 50.8 mm
0.25 to 2 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers
Front and rear: 76.2 mm
3 in.
at 1600 reel speed (engine high idle) -
10- Blade: 1.04 mm/km/h
10- Blade: 0.066 in./mph
8-Blade: 1.30 mm/km/h
8-Blade: 0.083 in./mph
Reel diameter 17.8 cm
7 in.
Measuring standard ISO 11201
Attachments installed FTCs, reels engaged
Type Two-year limited
Type ANSI B71.4-2012