Home / Equipment / Primary Tillage | 2730 Combination Ripper

Primary Tillage | 2730 Combination Ripper

Primary Tillage | 2730 Combination Ripper

Equipment
John Deere
#2730xh

Disclaimer

Caracteristics

  • Adjust depth in six seconds on the go
  • In-cab control of each functional area
  • 1/10th-in. (2.5-mm) accuracy
  • Expanded tractor compatibility

Please note that this product is not available online.
Get pre-approved for financing
SKU: 2730xh Categories: , ,

Description

2730 Combination Ripper Primary Tillage from John Deere. Learn more about the features and more for the 2730 Combination Ripper Primary Tillage.

Specifications

Working width Option 1: 4.3 m
14 ft
Option 2: 5.5 m
18 ft
Option 3: 5.5 m
Option 4: 6.7 m
22 ft
Option 5: 7.9 m
26 ft
Transport width Option 1: Individual blades: 6.1 m 19.9 ft
Disk gangs: 5.7 m 18.8 ft
Option 2: Individual blades: 6.9 m 22.5 ft
Disk gangs: 6.9 m 22.5 ft
Option 3: Individual blades: 5.7 m 18.8 ft
Disk gangs: 5.8 m 19.1 ft
Option 4: Individual blades: 5.6 m 18.3 ft
Disk gangs: 5.7 m 18.7 ft
Option 5: Individual blades: 5.6 m 18.3 ft
Disk gangs: 5.6 m 18.3 ft
Maximum operating depth 40.6 cm
16 in.
Operating speed 8-11.3 km/h
5-7 mph
Horsepower required per standard 25.1-41 kW
34-55 hp
Standards Spacing
61 cm
24 in.
Configuration Disk - Disk - Ripper - Closing Disk - Finishing Attachment
Option 1 Rigid 7-standard on spacing of 61 cm
24 in.
Option 2 Rigid 9-standard on spacing of 61 cm
24 in.
Option 3 Folding 9-standard on spacing of 61 cm
24 in.
Option 4 Folding 11-standard on spacing of 61 cm
24 in.
Option 5 Folding 13-standard on spacing of 61 cm
24 in.
Option 1 4.3 m
14 ft
Option 2 5.5 m
18 ft
Option 3 5.5 m
18 ft
Option 4 6.7 m
22 ft
Option 5 7.9 m
26 ft
Option 1 Individual blades: 6.1 m
19.9 ft
Disk gangs: 5.7 m
18.8 ft
Option 2 Individual blades: 6.9 m
22.5 ft
Disk gangs: 6.9 m
Option 3 Individual blades: 5.7 m
18.8 ft
Disk gangs: 5.8 m
19.1 ft
Option 4 Individual blades: 5.6 m
18.3 ft
Disk gangs: 5.7 m
18.7 ft
Option 5 Individual blades: 5.6 m
18.3 ft
Disk gangs: 5.6 m
Maximum operating depth 40.6 cm
16 in.
Standard 33 cm
13 in.
Maximum 95.25 cm
37.5 in.
Operating speed 8-11.3 km/h
5-7 mph
Horsepower required per standard 25.1-41 kW
34-55 hp
Option 1 Single-point crank
Option 2 TruSet™ tillage
Option 1 4 SCVs (depth control, front disk, rear conditioner, optional rolling baskets) at 17,237 kPa
2,500 psi
for optimum raise times
Option 2 5 SCVs (depth control, front disk, rear conditioner, wingfold, optional rolling baskets) at 17,237 kPa
2,500 psi
for optimum raise times
Design Single tube
Fore-aft adjustment Hitch turnbuckle
Spacing 61 cm
24 in.
Trip force Cushion-trip standard: 1,859.7 kg
4,100 lb
Trip height Shear bolt protected above: 33 cm
13 in.
Type Parabolic with or without wear shins, straight with wear shins
Type Wingless, LaserRip™ II points: 12.7 cm
5 in.
17.8 cm
7 in.
25.4 cm
10 in.
Coverboards On parabolic standards: 10.2 cm
4 in.
15.2 cm
6 in.
20.3 cm
8 in.
Description X-type configuration at front of tool
Depth control TruSet in-cab controls
Single-point depth control
Maximum depth 20.3 cm
8 in.
Type of standard C-spring
Base equipment blades Solid spherical low-concavity disk blades: 660x6 mm
26x0.25 in.
Blade spacing Individual: 45.7 cm
18 in.
Effective - 22.9 cm
9 in.
Disk gang: 27.9 cm
11 in.
Effective: 14 cm
5.5 in.
Front frame angle Fixed: 18 degree (angle)
Rear frame angle Fixed: 18 degree (angle)
Bearings Sealed, maintenance-free
Scraper Heavy-duty floating combination scraper (base option)
Description Solid-spherical low concavity closing disks (notched optional)
Adjustments TruSet in-cab controls
Mechanical
Base equipment blades Individual dual mount: 45.7 cm
18 in.
Bearings Sealed, maintenance-free
Type Tandem walk-over wheels
Option 1 Hydraulically adjustable finishing attachments
Knife-edge rolling basket
Round-bar rolling basket
Coil-tine harrow

Related products