Primary Tillage | 2720 Disk Ripper

Equipment
John Deere
#2720xh

Disclaimer |

Characteristics

  • Bury residue to 15-in. (38.1 cm) depths
  • Improved residue flow in wet conditions
  • The most level soil profile from a ripper
  • Exclusive hydraulic rolling basket option

Note that this product is available in store only.
Get pre-approved for financing
SKU: 2720xh Categories: , ,

Description

2720 Disk Ripper. Nowhere on earth can you find a disk ripper that does all this: Size and manage residue. Penetrate and shatter the compaction layer. Bury and mix residue. And help level the soil profile. All in just one pass.

Specifications

Working width 3.8-8.4 m
12.5-27.5 ft
Transport width With furrow filler attachment: 5.2-5.6 m
16.9-18.4 ft
Maximum operating depth 40.6 cm
16 in.
Operating speed 8-11.3 km/h
5-7 mph
Horsepower required per standard 66-75.6 kW
41-47 hp
Standards Spacing
76.2 cm
30 in.
Configuration Disk - Ripper - Disk - Conditioner
Option 1 Rigid 5-standard on spacing of 76.2 cm
30 in.
Option 2 Rigid 7-standard on spacing of 76.2 cm
30 in.
Option 3 Gang-fold rigid 7-standard on spacing of 76.2 cm
30 in.
Option 4 3-section flex-fold 9-standard on spacing of 76.2 cm
30 in.
Option 5 3-section flex-fold 11-standard on spacing of 76.2 cm
30 in.
Option 1 3.8 m
12.5 ft
Option 2 5.3 m
17.5 ft
Option 3 5.3 m
17.5 ft
Option 4 6.9 m
22.5 ft
Option 5 8.4 m
27.5 ft
Option 1 With furrow filler attachment: 5.2 m
16.9 ft
Option 2 With furrow filler attachment: 6.8 m
22.4 ft
Option 3 With furrow filler attachment: 5.5 m
18 ft
Option 4 With furrow filler attachment: 5.6 m
18.4 ft
Option 5 With furrow filler attachment: 5.6 m
18.4 ft
Maximum operating depth 40.6 cm
16 in.
Standard 25.4 cm
10 in.
Maximum 95.25 cm
37.5 in.
Operating speed 8-11.3 km/h
5-7 mph
Horsepower required per standard 66-75.6 kW
41-47 hp
Option 1 Single-point crank
Option 2 TruSet™ tillage
Option 1 2 SCVs (depth control, optional rolling baskets) at 17,237 kPa
2,500 psi
for optimum raise times
Option 2 3 SCVs (depth control, wingfold, optional rolling baskets) at 17,237 kPa
2,500 psi
for optimum raise times
Design Single hitch tube: 15.2x25.4 cm
6x10 in.
Fore-aft adjustment Hitch turnbuckle
Spacing 76.2 cm
30 in.
Trip force Cushion-trip standard: 1,859.7 kg
4,100 lb
Trip height Shear bolt protected above: 33 cm
13 in.
Type Parabolic with or without wear shins, straight with wear shins
Type Wingless, LaserRip™ II points: 12.7 cm
5 in.
17.8 cm
7 in.
25.4 cm
10 in.
Coverboards Parabolic cushion-trip standards with wear shins and holes to mount coverboards
Description Disk - Shank - Disk configuration
Depth control TruSet in-cab controls
Single-point depth control
Maximum depth 15.2 cm
6 in.
Type of standard C-spring
Base equipment blades Solid spherical low-concavity disk blades: 610x6.5 mm
24x0.256 in.
Blade spacing 27.9 cm
11 in.
Front frame angle Fixed: 18 degree (angle)
Rear frame angle 14-16 degree (angle)
Bearings Sealed, maintenance-free
Scraper Heavy-duty floating combination scraper (base option)
Type Tandem walk-over wheels options dependent on configuration
(4)11L-15 FI D LR tires
(4)340/65R18 Goodyear® tires
(4)340/65R18 Michelin® tires
Type Walk-Over tandem wheels, 57.2-mm (2.25-in.) diameter plug-in spindles and bolt hubs
Option 1 Hydraulically adjustable finishing attachments
Knife-edge rolling basket
Round-bar rolling basket