HDR45 Hinged Frame, Rigid Cutterbar Draper | Grain Harvesting

Equipment
John Deere
#hd45rh

Disclaimer |

Characteristics

  • Capture more crop in rolling and uneven terrain with a wing range of over 40”
  • Easily cut all crops with a consistent reel-to-cutterbar distance and improved reel torque
  • Achieve desired stubble height with Position Control Gauge Wheels
  • Reduce cutterbar loss with Grain Saver Draper Belts

Note that this product is available in store only.
Get pre-approved for financing
SKU: hd45rh Categories: ,

Description

Learn more about the features, specifications, and more for the HDR45 Rigid Cutterbar Draper Platforms.

Specifications

Cutterbar length 13.7 m
45 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Pickup reel operating speeds 8-70 rpm
Draper belts speed control Hydraulic from cab (side belts only)
Type Hinged frame rigid cutterbar
Type Straight-line knife drive system
Length 13.7 m
45 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Base skid shoe height 3.8 cm
1.5 in.
Number of slats Six bat poly
Fingers Nylon
Diameter 106.7 cm
42 in.
Height control Hydraulic
Speed control Hydraulic
Reel lift Off the cutterbar: 100.6 cm
39.6 in.
Reel fore and aft Fore of the cutterbar: 26.4 cm
10.4 in.
Reel resume Base
Reel reverse Base
Operating speeds 8-70 rpm
Width Side belts: 5.9 m
19.3 ft
Center belts: 200 cm
79 in.
Belt depth 100 cm
39.8 in.
Cleat height 19 mm
0.75 in.
Speed control Hydraulic from cab (side belts only)
Center belt reverse Base
Diameter 40.6 cm
16 in.
Feed drum fingers Heavy-duty and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Number of fingers 18
Auger finger platform Triple chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Operating speed Low speed: 200 rpm
High speed: 240 rpm
Center cleanout door Base
Type Electrohydraulic
Header height sensing on the ground Base
Header height sensing off the ground Base
Type Optional: hydraulic drive
250-350 rpm
Fingered augers Optional
Size Diameter: 43.2 cm
17 in.
Platform length 14.6 m
47.8 ft
Overall operating depth With dividers: 3.2 m
10.6 ft
Date collected 24 Mar 2021