Description
The C350 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.
Home / Equipment / Mower-Conditioners | C350 Mower-Conditioner
The C350 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.
PTO speed | 1000 rpm |
1000 rpm 1-3/8 in. PTO |
90-150 hp 68-112 kW |
Standard hitch | Equal angle |
Optional hitch | Rockshaft swivel or Drawbar swivel |
Hydraulic pressure required |
13,790 kPa 2,000 psi |
Cutterbar - cutting width |
3.5 m 11.5 ft |
Number of disks/knifes |
7 14 |
Transport width |
3.5 m 11.5 ft |
Tractor connection | 21 spline |
Standard hitch | Equal angle |
Optional hitch | Rockshaft swivel or Drawbar swivel |
Hydraulic pressure required |
13,790 kPa 2,000 psi |
Type | John Deere |
Cutting width |
3.5 m 11.5 ft |
Cutting height |
2.0-9.5 cm 0.8-3.8 in. |
Number of disks | 7 |
Number of knives | 14 |
Disk speed | 2,650 rpm |
Knife tip speed |
307 km/h 191 mph |
Disk drive | Gear |
Lubrication | Hy-Gard oil |
Oil reservoir capacity |
8.5 L 9 U.S. qt |
Cutterbar oil check | Combination check, drain plug |
Angle adjustment | Manual or hydraulic |
Angle range | 2-8 degree (angle) |
Cutterbar protection | ShearHub |
Adjustable gauge shoes | Yes |
Width |
236 cm 92.7 in. |
Diameter |
60 cm 23.5 in. |
Tines type | V-tines |
Number of tines | 57 |
Number of speeds | Two |
Drive | 3-V powerband belt and sheaves |
Width |
236 cm 92.7 in. |
Diameter |
25.4 cm 10 in. |
Type of material | Urethane or Steel |
Design | Urethane: Recessed cleat, Steel: Intermeshing flutes V-10 |
Speed | 664 rpm |
Drive | Telescoping shaft |
Transport width |
3.5 m 11.5 ft |
Transport length |
6.3 m 20.6 ft |
Weight, roll conditioner |
Swivel 2,978 kg 6,565 lb |
Weight, impeller conditioner |
With Equal angle 2,479 kg 5,465 lb Swivel 2,762 kg 6,089 lb With Urethane roll conditioner: 2,633 kg 5,805 lb Swivel 2,916 kg 6,429 lb With Steel roll conditioner: Equal angle 2,695 kg 5,941 lb |
Standard tires |
11L-15 standard 11L-15, Optional: 31x13.5L 15 |
Date collected | August 24, 2020 |