Rotary Cutters | FC15E Flex Wing Rotary Cutter

Commercial Mower
John Deere
#fc15ep

Disclaimer |

Characteristics

  • 15 ft. cutting width
  • 540 or 1000 PTO RPM
  • 50-plus HP tractor PTO compatibility
  • Laminated or pneumatic 4-bolt tires

Note that this product is available in store only.
Get pre-approved for financing

Description

New 15 foot cutting width has a newly designed cutter chamber.

Specifications

Cutting width 4.6 m
15 ft
Cutting capacity (diameter) 50.8 mm
2 in.
Tractor PTO HP range 37 kW
50 hp
Transport width At wing wheels: 2.8 m 9.1 ft
Deck thickness 11 gauge - 3 mm
0.12 in.
Side skirt thickness 3 gauge - 6 mm
0.24 in.
Approx. weight 2049 kg
4519 lb
Drivelines - Size - Main CV ASAE Category 4, splined telescoping profiles
Blade tip speed - 540 rpm - 1000 rpm 540 rpm: 87.8 m/s
288 fps
Gearboxes 5-year warranty
Cutting width 4.6 m
15 ft
Cutting height 25.4-406.4 mm
1-16 in.
Cutting capacity (diameter) 50.8 mm
2 in.
Cutting chamber depth 254 mm
10 in.
Tractor PTO HP range 37 kW
50 hp
Tractor PTO 540 rpm
Type Standard self-level hitch clevis with 57.2-cm (22.5-in.) narrow-profile width
Jack stand Mechanical jack stand in base for all machines with hydraulically operated height, stays vertical while raising/lowering
Transport width At wing wheels: 2.8 m 9.1 ft
Overall width 4.7 m
15.4 ft
Overall length 5.3 m
17.3 ft
Deck shape Easy-clean smooth top deck
Deck type Single
Deck thickness 11 gauge - 3 mm
0.12 in.
Side skirt thickness 3 gauge - 6 mm
0.24 in.
Hinges Intermittent cast steel segments - greaseable single 2.5-cm (1-in.) diameter full-length hinge pin
Approx. weight 1623 kg
3580 lb
Size Main
CV ASAE Category 4, splined telescoping profiles
Connecting
ASAE Category 4, splined telescoping profiles
Protection Connecting
No-seize, slip-clutch driveline
Number Four
HP rating Transfer
Continuous: 186 kW
250 hp
Peak: 224 kW
300 hp
Center
Continuous: 56 kW
75 hp
Peak: 75 kW
100 hp
Outer
Continuous: 56 kW
75 hp
Peak: 75 kW
100 hp
Thickness 13 mm
0.5 in.
Width 102 mm
4 in.
Type Suction
Overlap 152 mm
6 in.
Blade tip speed 540 rpm
86.6 m/s
284.1 fps
Blade holder Type
Round stump jumper for maximum protection for blade carrier against obstruction damage
Wing lift Simultaneous
Wing flex For transport: upward 90 degree (angle)
Upward working angle: 45 degree (angle)
Downward working angle: 22 degree (angle)
Type Option 1
4-bolt, laminated: 21x5.25x9
Option 2
4-bolt, 16PR severe-duty ag: 21x7x12
Suspension No suspension - rigid back axle
Row width adjustment No
Wing-leveling adjustment Easy adjust turnbuckle with bearing
Front Single-row chain guard
Rear Single-row chain guard
Gearboxes 5 years