Commercial Mowers | ZTrak™ Z930M Zero-Turn Mowers

Commercial Zero Turn Mower
John Deere
#930m_tc

Disclaimer |

Characteristics

  • 7-Iron™ PRO deck
  • Mulch On Demand™ Available
  • Gasoline Engine
  • Rear Discharge Deck

Note that this product is available in store only.
Get pre-approved for financing

Description

Made for customers who seek performance and efficiency, the M Series features durable 7-Iron™ Pro decks as well as commercial-grade engines.

Specifications

Engine Manufacturer/model FX801V
Engine power Gross at 3,600 rpm
25.5 hp
19 kW
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Mower deck size 54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO Mulch On Demand™
60-in. (152-cm) FastBack™ PRO rear-discharge
Blade tip speed 7Iron PRO: Approximately 18,500 fpm
60-in. (152-cm) FastBack: Approximately 16,500 fpm
Transmission Hydrostatic
Speed range 0-10 mph
0-16.1 km/h
Drive wheels 24x12-12
Caster wheels 13x6.5-6
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Manufacturer/Model FX801V
Power Gross at 3,600 rpm
25.5 hp
19 kW
Displacement 52 cu in.
852 cc
Cylinders Two
Crankcase capacity With filter, 2.4 U.S. qt
2.3 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valve Yes
Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)
Transmission Hydrostatic
Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Travel speed Speed range
0-10 mph
0-16.1 km/h
Forward
0-10 mph
0-16.1 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt
5.6 L
Filter Internal, replaceable
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Drive wheels 24x12-12
Load rating 4 PR
Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake
Type Electro-magnetic, 225 lb-ft
305 Nm
Drive V-belt
Size 54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO Mulch On Demand™
60-in. (152-cm) FastBack™ PRO rear-discharge
Deck construction 7-Iron™ PRO: 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel
FastBack™ PRO: 7-gauge, 0.179-in. (4.6-mm) fabricated steel
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Cutting width 54, 60 in.
137, 152 cm
Length Varies by deck size
Thickness 0.25 in.
0.64 cm
Blade tip speed 7Iron PRO: Approximately 18,500 fpm
60-in. (152-cm) FastBack: Approximately 16,500 fpm
Number Three
Caster wheel type Flat free
Caster wheels 13x6.5-6
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Standard
Length 84 in.
213 cm
Width With chute down, 68, 74 in.
173, 188 cm
Rear discharge, 63.5 in.
161.3 cm
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1,296 to 1,383 lb
588 to 627 kg
Rollover protective structure (ROPS) Yes
Slope operating limit 20 degrees (10 degrees with material collection system installed)
Date collected 15-Mar-2023