Description
View details for the 6080A PrecisionCut™ Fairway Mower featuring programmable TechControl Display.
Home / Equipment / Golf Equipment / Fairway Mowers /
Fairway Reel Mowers | 6080A PrecisionCut™ Fairway Mower
Fairway MowersJohn Deere
#608avtc
Characteristics
- 24.7 hp FT4 compliant Liquid-Cooled Diesel Engine
- 18” QA5 Cutting Units for an 80” total Width of Cut
- 3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive
- Passcode-protected TechControl display
Specifications
| Maximum rated horsepower |
At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm |
| Drive pump | Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge |
| Ground pressure |
69 kPa 10 psi |
| Throttle | Hand throttle |
| Operator display | TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected |
| Mowing speed |
0 to 12.8 km/h 0 to 8.0 mph |
| Cutting unit size |
Quick Adjust QA5: 45.7 cm 18 in. |
| Total width of cut |
203 cm 80 in. |
| Reel diameter |
12.7 cm 5 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
11- Blade: 0.69 mm/km/h 11- Blade: 0.044 in./mph 7-Blade: 1.09 mm/km/h 7-Blade: 0.069 in./mph |
| Type | Indirect Inject Diesel |
| Compliant emission regulation | United States and Canada Final Tier 4, EU Stage V |
| Horsepower |
Maximum rated horsepower At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm |
| Cylinders | Three |
| Displacement |
1.267 L 77.32 cu in. |
| Air cleaner | 2-stage dry element |
| Fuel | Diesel Up to B20 compliant |
| Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
| Drive pump | Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge |
| Hydraulic system capacity |
37.8 L 10 U.S. gal. |
| Fuel tank capacity |
45.4 L 12 U.S. gal. |
| Steering | Hydraulic power with double acting steering cylinder |
| Front drive tires | 24x13-12 smooth |
| Steering tires | 24x13-12 smooth |
| Ground pressure |
69 kPa 10 psi |
| Brakes | Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system |
| ROPS | Standard; meets ISO 21299 Standard |
| Cutting units lowered |
1046 kg 2301 lb Canopy, FTCs and Power Brushes installed, full fuel |
| Throttle | Hand throttle |
| Forward/reverse |
2-pedal electronic control of eHydro system |
| Mower lift | One-touch single handle |
| Parking brake | Electric Switch on Command Arm for Internal Wet Disk Brakes |
| Seat | Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment |
| PTO | Electric Switch on Command Arm |
| Tilt steering | Left Foot operated for easy adjustment |
| Operator display | TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected |
| Storage | Cup holder; two-way radio; large operator storage located on left hand side of operator station |
| Height with ROPS |
215.3 cm 84.8 in. |
| Length |
305 cm 120.1 in. |
| Transport width |
232 cm 91.3 in. |
| Mowing position width |
233 cm 91.7 in. |
| Ground speed |
Mowing 0 to 12.8 km/h 0 to 8.0 mph 4WD mow speed N/A Transport 0 to 16.1 km/h 0 to 10.0 mph Reverse 0 to 9.7 km/h 0 to 6.0 mph |
| Number | Five |
| Size |
Quick Adjust QA5: 45.7 cm 18 in. |
| Total width of cut |
203 cm 80 in. |
| Height of cut |
Construction 2.0 to 28.5 mm 0.078 to 1.125 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
Rollers Front and rear: 50.8 mm 2 in. Optional Front : 76.2 mm 3 in. At 2200 reel speed (engine high idle) - 11- Blade: 0.69 mm/km/h 11- Blade: 0.044 in./mph 7-Blade: 1.09 mm/km/h 7-Blade: 0.069 in./mph |
| Reel diameter |
12.7 cm 5 in. |
| Measuring standard | ISO 11201 |
| Attachments installed | FTCs, reels engaged |
| Type | Two-year limited |
| Type | ANSI B71.4-2012 |
