Fairway Reel Mowers | 7700A PrecisionCut™ Mower

Fairway Mowers
John Deere
#770avtc

Disclaimer |

Characteristics

  • TechControl™ Display locks in performance, and uptime
  • Set mowing turn speed to reduce scuffing
  • AutoPedal™ lowers fuel consumption and noise
  • Final Tier 4 without sacrificing horsepower

Note that this product is available in store only.
Get pre-approved for financing
SKU: 770avtc Categories: , ,

Description

7700A PrecisionCut Fairway Mower featuring programmable TechControl Display.

Specifications

Maximum rated horsepower At 2800 rpm ISOC: 31 kW
At 2800 rpm ISOC: 41.6 hp
Drive pump Tandem gear pump
Ground pressure 69 kPa
10 psi
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Mowing speed 0-12.8 km/h
0-8.0 mph
Cutting unit size Quick Adjust QA7: 55.9 cm
22 in.
Total width of cut 254 cm
100 in.
Reel diameter 17.8 cm
7 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) 10 Blade: 1.06 mm/km/h
10 Blade: 0.067 in./mph
8 Blade: 1.33 mm/km/h
8 Blade: 0.084 in./mph
Type Direct Inject Turbocharged Diesel
Compliant emission regulation United States and Canada Tier 4
Horsepower Maximum rated horsepower
At 2800 rpm ISOC: 31 kW
At 2800 rpm ISOC: 41.6 hp
Cylinders Three
Displacement 1.568 L
95.69 cu in.
Air cleaner 2-stage dry element
Fuel Diesel up to B20 compliant
Cooling system Liquid centrifugal pump; forward machine location for optimum cooling
Drive pump Tandem gear pump
Hydraulic system capacity 37.8 L
10 U.S. gal.
Fuel tank capacity 60.6 L
16 U.S. gal.
Steering Hydraulic power with double acting steering cylinder
Front drive tires 26.5x14-12 turf
Steering tires 20x12X10-8 turf
Ground pressure 69 kPa
10 psi
Brakes Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS Standard; meets ISO 21299 Standard
Cutting units lowered 1202 kg
2650 lb
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display
Forward/reverse 2-pedal
Mower lift One-touch single handle
Parking brake Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO Electric Switch on Command Arm
Tilt steering Left Foot operated for easy adjustment
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Storage Cup holder; two-way radio; large operator storage located on left hand side of operator station
Height with ROPS 224 cm
88 in.
Length 323 cm
127 in.
Transport width 287 cm
113 in.
Mowing position width 295 cm
116 in.
Ground speed Mowing
0-12.8 km/h
0-8.0 mph
Transport
0-18.5 km/h
0-11.5 mph
Reverse
0-6.4 km/h
0-5 mph
Number Five
Size Quick Adjust QA7: 55.9 cm
22 in.
Total width of cut 254 cm
100 in.
Height of cut Ten-blade QA7: 6.3-50.8 mm
Ten-blade QA7: 0.25-2.0 in.
Eight-blade QA7: 6.3-50.8 mm
Eight-blade QA7: 0.25-2.0 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers
Front and rear: 7.6 mm
3 in.
10 Blade: 1.06 mm/km/h
10 Blade: 0.067 in./mph
8 Blade: 1.33 mm/km/h
8 Blade: 0.084 in./mph
Reel diameter 17.8 cm
7 in.
Measuring standard ISO 11201
Attachments installed FTCs, reels engaged
Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality 25% load: 2.8 L/hr
0.75 gph
40% load: 4.32 L/hr
1.14 gph
50% load: 5.22 L/hr
1.38 gph
Type Two-year limited
Type ANSI B71.4-2012.