Rough Mowers | 9009a TerrainCut™

Rough Trim and Surround Mowers
John Deere
#9009atc

Disclaimer |

Characteristics

  • Five, 27-in. independent rotary decks with a 9-foot cutting width
  • Deep shell deck design with exclusive rear discharge chute
  • No-tool notch system for easy height-of-cut adjustments
  • LoadMatch™ for excellent climbing and cut quality

Note that this product is available in store only.
Get pre-approved for financing

Description

9009A TerrainCut Rough Mower, featuring programmable TechControl Display. Build your own today.

Specifications

Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW
At 2800 rpm ISOC: 55.1 hp
Drive pump Tandem gear pump
Ground pressure 82.7 - 124 kPa
12 - 18 psi
Throttle No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Weight Transfer and Cruise Control Use selection:; Cutting unit drop rate adjustment; ALL settings are pass code protected
Mowing speed 0 - 12.8 km/h
0 - 8 mph
Cutting unit size 68.58 cm
27 in.
Total width of cut 2.74 m; 17.15 cm overlap between front and rear decks
9 Feet; 108 in.; 6.75 in. overlap between front and rear decks
Frequency of clip (FOC Reels) OR Blade tip speed (decks) 409 m
16,097 fpm
Type Direct Inject Turbocharged Diesel B20 compliant
Compliant emission regulation United States/Canada Final Tier 4
Horsepower Maximum rated horsepower
At 2800 rpm ISOC: 41.1 kW
At 2800 rpm ISOC: 55.1 hp
Cylinders Four
Displacement 2.091 L
127.6 cu in.
Air cleaner 2-stage dry element
Fuel Diesel up to B20 compliant
Cooling system Liquid centrifugal pump; forward machine location for optimum cooling
Traction drive eHydro™ servo controlled hydraulic traction pump provides flow to All-wheel-drive GRIP system; GRIP traction provides hydraulic flow between front and opposite rear wheel for increased traction to reduce 'high side tire slippage
Drive pump Tandem gear pump
Cutting units drive Direct-coupled hydraulic gear motor
Hydraulic system capacity 45.4 L
12 U.S. gal.
Fuel tank capacity 60.6 L
16 U.S. gal.
Steering Hydraulic power with dual rod, double acting steering cylinder
Front drive tires 26.5x14-12 6PR Ultra Trac
Steering tires 20x12-10 4PR Turf
Ground pressure 82.7 - 124 kPa
12 - 18 psi
Brakes Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS Standard, meets ISO 21299 standards
Cutting units lowered 1814.37 kg with decks up
4000 lb. with decks up
Throttle No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display
Forward/reverse 2-pedal
Mower lift One-touch single handle
Parking brake Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat Air Ride Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO Electric Switch on Command Arm for quick and easy transition from mow to transport
Ignition Key Switch on Command Arm
Work lights 3 standard work lights in front
Tilt steering Left Foot operated for easy adjustment
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Weight Transfer and Cruise Control Use selection:; Cutting unit drop rate adjustment; ALL settings are pass code protected
Storage Operator storage located on left side for easy access from operator seat
Height with ROPS 2220 mm
87.4 in.
Length 3393 mm
134 in.
Transport width 2287 mm @ 101.60 mm height of cut
90 in @ 4 in height of cut
Mowing position width 2.74 m; 17.15 cm overlap between front and rear decks
9 Feet; 108 in; 6.75 in. overlap between front and rear decks
Wheelbase 1750 mm
68.9 in.
Ground speed Mowing
0 - 12.8 km/h
0 - 8 mph
Transport
0 - 20.12 km/h
0 - 12.5 mph
Reverse
0 - 6.4 km/h
0 - 5 mph
Number 5
Size 68.58 cm
27 in.
Total width of cut 2.74 m; 17.15 cm overlap between front and rear decks
9 Feet; 108 in.; 6.75 in. overlap between front and rear decks
Height of cut Construction
single sheet 10-gauge steel stamped deck with front skid plate 1.5 inch (38mm) tall and ½ inch (12.7mm) thick steel stock welded to the decks edge
1.91 to 10.2 cm; no tool adjustment
.75 - 4 in; no tool adjustment
Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers
Rear: 7.62 cm
Rear: 3 in.
Front: 12.70 cm
Front: 5 in.
409 m
16,097 fpm
Operator ear full engine 90 dBA
Measuring standard ISO 11201
Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality 25% load 3.63 Liters per hour (.96 GPH)
40% Load 5.64 Liters per hour (1.49 GPH)
50% Load 6.85 liters per hour (1.81 GPH )
Type Two-year limited
Type ANSI B71.4-2012.; CE