Description
View features and specifications for the 180SL PrecisionCut Walk Greens Mowers.
Home / Equipment / Golf Equipment / Walk Greens Mowers /
180SL SL PrecisionCut™ | Walk Greens Mowers
Walk Greens MowersJohn Deere
#180sam
Characteristics
- Standard operator-presence system
- Rubber isolators for reduced vibration
- Long life, reduced maintenance, and superior toughness
- Easily accessible bedknife-to-reel adjustment
Specifications
| Engine Type | Air-cooled, Gas |
| Horsepower |
At 3600 rpm: 2.4 kW 3.2 hp Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. |
| Cutting width |
45.7 cm 18 in. |
| Frequency of clip standard |
11 Blade 4.62 14 Blade, Optional Speed up kit 11 blade, 14 blade: 3.94 mm 0.182 in. Optional Speed up kit 11 blade, 14 blade: 3.94 mm 0.155 in. |
| Reel diameter, in. (mm) |
127 mm 5 in. |
| Number of blades | 11 or 14 blades through parts |
| Traction drum | Dual, aluminum |
| Forward speed |
With transport wheels at 3000 engine rpm: 7.2 km/h 4.6 mph |
| Weight (less GTC's, gear drive and transport wheel, with catcher) |
92.7 kg 204 lb |
| Operator ear | 82 dBA |
| Type | Air-cooled, Gas |
| Cycle | 4-cycle |
| Bore and stroke |
60x42 mm 2.36x1.65 in. |
| Piston displacement |
122 cc 7.4 |
| Compression ratio | 8:5:1 |
| Horsepower |
At 3600 rpm: 2.4 kW 3.2 hp Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. |
| Direction of rotation of output shaft | Counterclockwise viewed from shaft side |
| Inclination limit | Tilted up to 20 degrees in any direction |
| Idle speed at output shaft | 1600 (+/- 100) rpm |
| Maximum speed at output shaft | 2950 (+/- 150) rpm |
| Type | Regular grade unleaded or leaded |
| Tank capacity |
2.5 L 0.66 U.S. gal. |
| Type | SAE 30 or SAE 10W-30 |
| Capacity |
0.6 L 0.63 U.S. qt |
| Differential drive capacity |
0.14 L 0.3 U.S. qt |
| Cutting width |
45.7 cm 18 in. |
| Cutting height (minimum) |
Standard - 3.0 mm bedknife Min. 3.2 mm 0.125 in. Max. 22 mm 0.875 option Optional - 2.5 mm bedknife Min 2.5 mm 0.098 in. Max. 22 0.875 in. option Optional - 2.0 mm bedknife Min 2.0 mm 0.078 in. Max. 22 mm 0.875 in. standard |
| Frequency of clip standard |
11 Blade 4.62 14 Blade, Optional Speed up kit 11 blade, 14 blade: 3.94 mm 0.182 in. Optional Speed up kit 11 blade, 14 blade: 3.94 mm 0.155 in. |
| Diameter, in. (mm) |
127 mm 5 in. |
| Number of blades | 11 or 14 blades through parts |
| Material | Heat-treated chromium molydenum steel |
| Brush | Interlocked with reel, rotation in reverse direction; 2-3/8-in. (60-mm) diameter nylon |
| Vertical cutter blades | Specially hardened carbon tool steel; star shaped; 2-3/8-in. (60-mm) diameter, 60 blades |
| Adjustable brush or cutter height |
Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm 0.0313 in. |
| Gear drive | Gear driven from reel shaft, opposite direction of reel, rotation powers brush or vertical cutter |
| Size |
2.7 kg 6 lb |
| Type | Polyethylene |
| Transport | Belt tension |
| Reel jaw-type clutch | On/off |
| Brush/GTC jaw-type clutch | On/off |
| Traction drum | Dual, aluminum |
| Forward speed |
With transport wheels at 3000 engine rpm: 7.2 km/h 4.5 mph |
| Roller (rear) |
Aluminum, diameter: 190 mm 7.5 in. |
| Roller (front) (grooved or smooth) |
Machined steel, diameter: 50 mm 2 in. for cutting height adjustment |
| Length (w/tires installed) |
940 mm 37 in. |
| Width (w/tires installed) |
84.5 cm 33.3 in. |
| Height (w/tires installed) |
119 cm 47 in. |
| Weight (less GTC's, gear drive and transport wheel, with catcher) |
92.7 kg 204 lb |
| Operator ear | 82 dBA |
| Measuring standard | ISO 11201 |
| Attachments installed | GTCs, reels engaged |
| Type | ANSI B71.4-2004 |
