Description
Tractor for life-style farmers and large-estate owners. Visit JohnDeere.ca to get information on the newest addition to the compact tractor lineup – the 3E Series.
Home / Equipment / Tractors / 3 Series Compact Tractors /
Compact Tractor | 3038E
3 Series Compact TractorsJohn Deere
#3038elv
Characteristics
- Standard four-wheel drive (4WD) for maximum traction
- Hydro transmission with Twin Touch™ pedals for ease of use
- Category 1 3-pt hitch compatible with dozens of implements
Specifications
| Engine power (gross) |
SAE J1995 rated power: 27.4 kW 36.7 hp 37.2 PS at 2500 rpm |
| Power take-off (PTO) power |
22.4 kW 30 hp |
| Steering hydraulics |
15.0 L/min 4.0 gpm |
| Implement hydraulics |
20.2 L/min 5.3 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms |
615 kg 1356 lb |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Cruise control | Optional |
| Approximate shipping weight (open-station; cab) |
Open operator station (OOS): 1210 kg 2668 lb Cab: Not applicable |
| Wheelbase |
1593 mm 62.7 in. |
| Family |
FYDXL1.57TDA EYDXL1.57TDA GYDXL1.57TDA |
| Manufacturer | Yanmar |
| Engine model | 3TNV86CT-NJT2 |
| Engine power (gross) |
SAE J1995 rated power: 27.4 kW 36.7 hp 37.2 PS at 2500 rpm |
| Power take-off (PTO) power |
22.4 kW 30 hp |
| Rated engine speed | 2500 rpm |
| Type | Diesel |
| Injection pump type | High pressure common rail direct injection |
| Aspiration | Turbocharged |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement |
3 / 1.57 L 3 / 95.7 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke |
86 x 90 m 3.4 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water Pump |
| Air cleaner | Dual element |
| Engine torque at rated speed |
104.7 Nm 77.2 lb-ft |
| Fuel tank capacity |
28.5 L 7.5 gal. |
| Battery size | 500 CCA |
| Alternator (12-V) | 55 amp |
| Starter size |
1.4 kW 1.9 hp |
| Type | High pressure common rail direct injection |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Left-hand reverser | No |
| Final drive | Spur gear |
| Brakes | Wet disk |
| Steering | Power steering |
| Axle capacity |
Front 880 kg 1940 lb Rear 1200 kg 2645 lb |
| Creeper | No |
| Cruise control | Optional |
| Differential lock | Yes |
| Type | Open center |
| Pump rated output |
Steering 15.0 L/min 4.0 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
| Pump type | Dual gear |
| Maximum operating pressure |
172 bar 2495 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to two (optional) |
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms |
615 kg 1356 lb |
| Standard | Rear - 540 rpm |
| Control | Independent |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Crankcase with filter |
4.5 L 4.8 gal. |
| Transmission and hydraulic system |
20.8 L 22 qt |
| Type | Spur gear |
| Differential lock | Yes |
| Rollover protective structure |
Type Foldable |
| Platform - flat/straddle | Straddle |
| Gear shift location - console/floor | Left-hand side |
| Wheelbase |
1593 mm 62.7 in. |
| Front axle clearance |
Minimum: 299 mm 11.8 in. Maximum: 333 mm 13.1 in. |
| Turning radius without brakes |
2.9 m 9.4 ft |
| Approximate shipping weight (open-station; cab) |
OOS: 1210 kg 2668 lb Cab: Not applicable |
| Front |
R1 Bar: 7-14 R3 Turf: 27x8.5-15 R4 Industrial: 25x8.5-14 R4 Industrial: 27x8.5-15 |
| Rear |
R1 Bar: 11.2-24 R3 Turf: 41x14-20 R4 Industrial: 15-19.5 R4 Industrial: 43x16-20 |
