6R 140 | Utility Tractors

6 Series Utility Tractors
John Deere
#6140rl_22

Disclaimer |

Characteristics

  • John Deere FT PowerTech™ 4-cylinder engines
  • Engine HP: 154 HP Max/140 HP Rated with up to 20 additional HP (IPM)
  • AutoQuad™ or IVT transmission
  • Cat. 2/3N Hitch with lift capacity over 7,900lb.

Note that this product is available in store only.
Get pre-approved for financing
SKU: 6140rl_22 Categories: , ,

Description

The 6R 140 has the hydraulic power to make material handling its specialty, and enough versatility for about any chore you have on the ranch, farm or worksite.

Specifications

Engine description John Deere PowerTech™ PSS
Engine displacement 4.5 L
275 cu in.
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 97/68EC: 103 kW
140 hp
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 97/68EC: 113 kW
154 hp
Rated PTO power (hp SAE) 82 kW
110 hp
Hydraulic pump rated output Standard: 45 cc pump: 114 L/min
30 gpm
Optional: 60 cc pump: 155 L/min
41 gpm
Rear hitch category (SAE designation) Standard: Category 2/3N: 3600 kg
7937 lb
Optional: Category 2/3N: 4100 kg
9039 lb
Base machine weight 6200 kg
13,668 lb
Description John Deere PowerTech PSS
Engine type Diesel, in-line, 4-cylinder, wet-sleeve cylinder liners with four valves in head
Engine family NJDXL06.8324
Rated speed 2100 rpm
Aspiration Turbocharged, fixed geometry first stage, variable geometry second stage, air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
After treatment type DOC/DPF/SCR
Displacement 4.5 L
275 cu in.
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 97/68EC: 103 kW
140 hp
Rated PTO power (hp SAE) 92 kW
123 hp
Intelligent Power Management (IPM) Transport and/or mobile PTO applications
Additional engine power (hp ISO) at 2100 rpm: 14.9 kW 20 hp
Power boost 10 percent
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 97/68EC: 113 kW
154 hp
Engine peak torque At 1600 rpm: 656 Nm
484 lb-ft
PTO torque rise 40 percent
Type Standard: IVT, 0.05-42 km/h 0.03-26 mph
Optional: IVT, 0.05-50 km/h 0.03-31 mph
24-speed AutoQuad PLUS ECO (40K)
24-speed AutoQuad PLUS ECO (50K)
Reverser Left-hand electrical reverser
Creeper Available with AutoQuad
Type Closed-center, pressure-and-flow compensated
Pump rated output Standard: 45 cc pump: 114 L/min
30 gpm
Optional: 60 cc pump: 155 L/min
41 gpm
Available flow at a single rear SCV 100 L/min
26 gpm
Number of rear selective control valves (SCVs) Standard: Three ISO couplers
Optional: Three to five ISO couplers
Number of mid selective control valves (SCVs) Up to three
Joystick SCV control Available
SCV control Standard: Mechanical
Optional: Electronic
Remote control valves available Available: Remote control switch
Hitch category (SAE designation) Standard: Category 2/3N: 3600 kg
7937 lb
Optional: Category 2/3N: 4100 kg
9039 lb
Maximum lift capacity behind lift points 4100 kg
9039 lb
Sensing type Electrohydraulic
Rear axle differential lock Electrohydraulic
Drawbar category Category 2
Maximum vertical load Category 2: 1400-2450 kg
3085-5400 lb
Maximum vertical load dependent on drawbar position
Type Independent
Standard: 35 mm (1.375 in) 540, 540E, 1000 rpm reversible shaft
Engine rpm (at rated PTO speeds) 1967 engine rpm at 540 rpm PTO
1496 engine rpm at 540E rpm PTO
1962 engine rpm at 1000 rpm PTO
PTO actuation Electrical modulation
Category Category 3N
Electric power Seven-pin electrical socket
Optional: Three-pin and ISOBUS socket
Standard lift capacity At hook ends: 3300 kg
7275 lb
Front power take-off (PTO) 1000 rpm, clockwise rotation (from driving position)
PTO speed Engine at PTO speed (1000): 1969 rpm
Type Standard: Flange, 1552 mm 61 in.
Optional: Rack and pinion, 2550 mm 100.4 in.
Rack and pinion, 2438 mm 96 in.
Final drive type Inboard planetary three pinion
Differential controls Full-locking electrohydraulic
Front axle differential lock MFWD: Limited slip
TLS: Limited slip
TLS with brakes: Full-locking electrohydraulic
Rear 420/85R30 (16.9R-30)
Wheel tread range MFWD: 1524-2235 mm 60-88 in.
TLS: 1524-2235 mm 60-88 in.
Type Hydrostatic power
Alternator size Standard: 120 amp
Optional: 250 amp
Battery options 12 V
Working lights Standard: 14 halogen
Optional: 12 light-emitting diode (LED) plus two halogen
Type of bulb in headlight (Halogen, Zenon, LED) Standard: 65-W halogen W
Optional: LED
Total cold cranking amps 1200 CCA
Seat Degree of seat swivel, left hand
CommandARM: 7.5 degree
Degree of seat swivel, right hand
CommandARM: 30 degree
Standard: Air suspension
Optional: Deluxe air suspension
Cab suspension Optional: Adaptive Hydraulic Cab Suspension Plus (HCS Plus)
Instructional seat Standard
Radio Optional
Inner cab volume 3.33 m3
117.59 cu ft
dB(A) rating 71 dB
Cab glass area 6.11 m2
65.77 sq ft
Wheelbase MFWD: 2580 mm
102 in.
Overall width 1680 mm
66.1 in.
Overall length 4533 mm
178.5 in.
Overall height 2886 mm
113.6 in.
Front axle center 506 mm
19.9 in.
Approximate shipping weight, Open;Cab 6200 kg
13,668 lb
Base machine weight Front axle
2480 kg
5467 lb
Rear axle
3720 kg
8201 lb
Total
TLS, AutoQuad, 600/65R38, 540/65R24, shipping fuel, front weight support: 5470 kg
12,059 lb
TLS, IVT, 600/65R38, 540/65R24, shipping fuel, front weight support: 6091 kg
13,428 lb
6200 kg
13,668 lb
Maximum permissible weight 9950 kg
21,936 lb
Crankcase oil volume 16 L
4.2 U.S. gal.
Fuel tank 195 L
51.5 U.S. gal.
Diesel exhaust fluid (DEF) tank 13 L
3.4 U.S. gal.
Cooling system 28 L
7.4 U.S. gal.
Transmission-hydraulic system IVT: 60 L
14 U.S. gal.
AutoQuad: 53 L
15.9 U.S. gal.
Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours
Loader 620R
640R
Lift capacity at full height 620R: 2577 kg
5861 lb
640R: 2181 kg
4808 lb
Maximum lift height 620R: 4124 mm
162 in.
640R: 4151 mm
163 in.
Country of manufacture Germany
Date collected 12-Nov-21