Specialty Tractors | 5100GN

Specialty Tractors
John Deere
#5100gat

Disclaimer |

Characteristics

  • FT4 100 hp engine/86 hp PTO
  • Improved turning radius
  • Two transmissions available: 12F/12R and 24F/12R
  • Multiple operator station options

Note that this product is available in store only.
Get pre-approved for financing
SKU: 5100gat Categories: , ,

Description

5100GN Tractor

Specifications

Engine description 3.4L Fiat® Powertrain Technologies
Engine displacement 4 cylinder: 3.4 L
207 cu in.
Rated engine power 74.6 kW
100 hp
Rated PTO power (hp SAE) 64.9 kW
87 hp
Transmission type 24F/12R PowrReverser, EH Hi-Lo
Hydraulic pump rated output Standard: 96.5 L/min
25.5 gpm
Optional: 126.4 L/min
33.4 gpm
Rear hitch category (SAE designation) Category 1/Category 2
Base machine weight OOS: 2660 kg
5864 lb
Cab: 2975 kg
6558 lb
Description 3.4L Fiat® Powertrain Technologies
Engine family FPTF34
Rated speed 2300 rpm
Aspiration Turbocharged
Cylinders liners Wet sleeved
Emission level Final Tier 4
After treatment type Diesel Oxidation Catalyst (DOC) and Selective Catalyst Reduction (SCR)
Displacement 4 cylinder: 3.4 L
207 cu in.
Rated power 74.6 kW
100 hp
Rated PTO power (hp SAE) 64.9 kW
87 hp
Type 24F/12R PowrReverser, EH Hi-Lo
Reverser Yes
Clutch; wet/dry Wet
Creeper Yes
Type Open Center
Pump rated output Standard: 96.5 L/min
25.5 gpm
Optional: 126.4
33.4 gpm
Available flow at a single rear SCV 41.6 L/min
11 gpm
Number of rear selective control valves (SCVs) Standard: 2
Optional: 4
SCV control Mechanical
Hitch draft control load sense type Mechanical
Hitch category (SAE designation) Category 1/Category 2
Maximum lift capacity behind lift points 2549 kg
5620 lb
Sensing type Top Link Draft Sensing
Drawbar category Extendable
Type Standard: 540/540E
Engine rpm (at rated PTO speeds) 540 at 1938 rpm
540E at 1648 rpm
PTO actuation Electrohydraulic
Type Carraro Drivetech
Final drive type Three point inboard planetary drives
Differential controls Multi disk oil cooled design
Axle type Flanged
Brakes, type and control Multi-disc rear braking
Rear differential lock Electrohydraulic
Type Carraro Drivetech
Front axle differential lock Self Locking Differential
Front 7.50R16
Rear 280/70 R18
Turning radius without brakes 3627 mm
11.9 ft
Type Dynamic Load Sensing, Hydrostatic, Flow Metering
Alternator size 120 amp
Rollover protective structure, OOS Rigid - foldable - telescopic
Rigid, front folding
Platform - flat/straddle
Straddle
Gearshift location - console/floor
Floor
Yes
Seat OOS: standard: COBO MT SC74 M200
Optional: COBO MT SC74 M97
Cab: standard: COBO MT SC74 M200
Optional: GRAMMER MSG93/511
dB(A) rating 82
Wheelbase 2098 mm
82.5 in.
Overall length 4319 mm
170 in.
Drawbar clearance Min. 254 mm
10 in.
Max. 289 mm
11.3 in.
Front axle center Min. 254 mm
10 in.
Max. 289 mm
11.3 in.
Base machine weight OOS: 2660 kg
5864 lb
Cab: 2975 kg
6558 lb
Maximum permissible weight 4200 kg
9259.41 lb
Fuel tank Standard: 73.1 L
19.3 U.S. gal.
Optional: 101.4 L
26.8 U.S. gal.
Interval for engine oil change 500
Interval for hydraulic/transmission oil change 750